I. FRP Skylight Tiles-a thil awm dan bulpui ber
1. A rit lo leh a sang-Strength: FRP (fiber reinforced polymer) Skylight tiles hian density 1.4{{3}1.8 g/cm3 chauh a nei a (source: "industry standard for fiber reinforced polymers for construction"), chu chu traditional glass rit ber zinga pakhat a ni. Mahse, 120 MPa aia tam impact strength an pe a, hei vang hian long-span roof structure atan an tha hle.
2. Light transmittance leh weather resistance: Light transmittance hi a tlangpuiin 50% atanga 85% (customizable) inkar a ni a, UV coating hian kum 10 chuang UV aging resistance a pe thei bawk (ASTM G154 accelerated aging test standard tihna a ni).
3. Kangmei leh corrosion resistance: B1 flame retardant rating (GB8624-2012 standard) an nei a, acid leh alkali corrosion lakah an inveng thei a, chemical plant ang chi boruak khirh tak tak tan pawh a tha hle.
4. Energy-saving leh environment friendly: an diffused light design hian glare a ti tlem a, indoor lighting energy hman a ti tlem bawk. Product thenkhat pawh recyclable a ni a, recycling rate pawh 70% thleng a ni.
II a ni. Installation leh hman dan tur guide .
1. Pre-Installation buatsaih dan tur .
- Measurement and Laying Out: Roof dimensions atanga thlirin 5%-10% thermal expansion gap phalsak (10℃temperature inthlak apiangin 1.2mm/m expansion joint a ngai a ni).
- Base Material Preparation: Purlin spacing chu 1.2M aia tlem emaw, a tlukpui emaw (recommended value) emaw, purlin flatness deviation chu 3mm/2m aia tlem emaw, a tlukpui emaw a nih leh nih loh enfiah rawh.
2. In sak dan tur .
- 1 Laying Order: Eaves atang chuan ridge lam hawiin a awm a, overlap length chu 200mm aia tam emaw, a tlukpui emaw a ni a, vertical-in vertical leh 1 wave crest aia tam emaw, a tlukpui emaw chu horizontal-in a awm bawk.
- 2 Fixing Method: Self-tapping screw leh waterproof washers hmang la, 500mm aia tlem emaw a aia tlem emaw a awm ang. Hammer emaw overtighten emaw suh.
- 3 Sealing: PVC material nena direct-a inhnaih loh nan leh corrosion awm thei tur ven nan neutral silicone sealant hmangin joint te chu seal rawh.
3. Enkawlna .
- Thil harsa tak tak atanga leivut leh hrual loh nan tile chunglam chu tifai fo thin ang che;
- Kum hnih danah fastener te chu a lo chhuak leh a leak loh nan check thin ang che;
- Khaw lum lutuk hnuah (hail ang chi) tile chunglam chu a chhiat leh chhiat loh enfiah rawh.